GD02G Economical Cross-Linked Shrink Film
GD02G is a full-featured POF shrink film.Its highstrength and high shrinkage properties make itsuitable for any packaging equipment.GD02G'smost competitive cost control allows you to savethe cost of use to the maximum extent.Perfectpackaging performance and the most competitivecost control are the reasons why we stronglyrecommend you to use this film.Available thickness:12um,15um,19um,25um
Description
GD02G is a full-featured POF shrink film.Its highstrength and high shrinkage properties make itsuitable for any packaging equipment.GD02G'smost competitive cost control allows you to savethe cost of use to the maximum extent.Perfectpackaging performance and the most competitivecost control are the reasons why we stronglyrecommend you to use this film.Available thickness:12um,15um,19um,25um
| TEST ITEM | UNIT | ASTM TEST | TYPICAL VALUES | ||||
| GAUGE | 12um | 15um | 19um | 25um | |||
| TENSILE | |||||||
| Tensile Strength (MD) | N/mm² | D882 | 130 | 130 | 130 | 125 | |
| Tensile Strength (TD) | 125 | 125 | 125 | 120 | |||
| Elongation(MD) | % | 110 | 115 | 120 | 120 | ||
| Elongation(TD) | 105 | 110 | 110 | 115 | |||
| TEAR | |||||||
| MD at 400gm | f | D1922 | 9 | 14.0 | 16.5 | 22.5 | |
| TD at 400gm | 9.5 | 13.0 | 18.5 | 23.5 | |||
| SEAL STRENGTH | |||||||
| MD'Hot Wire Seal | N/mm | F88 | 0.95 | 1.20 | 1.25 | 1.50 | |
| TD'Hot Wire Seal | 1.05 | 1.35 | 1.45 | 1.65 | |||
| COF (Filim To Film) | |||||||
| Slatic | D1894 | 0.24 | 0.21 | 0.18 | 0.19 | ||
| Dynamic | 0.24 | 0.21 | 0.18 | 0.19 | |||
| OPTICS | |||||||
| Haze | D1003 | 2.2 | 2.4 | 2.6 | 2.9 | ||
| Clarity | D1746 | 98.5 | 98.5 | 98.0 | 98.0 | ||
| Gloss @45Deg | D2457 | 89.0 | 88.5 | 88.0 | 86.5 | ||
| BARRIER | |||||||
| Oxygen Transmission Rate | cc/m/day | D3985 | 12100 | 9700 | 7400 | 6800 | |
| Water Vapor Transmission Rate | gm/m/day | F1249 | 40.5 | 32.5 | 25.5 | 19.5 | |
| SHRINKAGE PROPERTIES | MD | TD | |||||
| Free Shrinkage | % | D2732 | |||||
| 120℃ | 60 | 65 | |||||
| MD | TD | ||||||
| Shrink Tension | Mpa | D2838 | |||||
| 120℃ | 2.8 | 3.8 | |||||
MD/Machine Direction TD/Transverse Direction
Note:This information represents our best judgment on the work done,but the company assumes no liabilitywhalsoever in connection with the use of information or findinas contained herein.
